- #Vcp driver download install#
- #Vcp driver download software#
- #Vcp driver download Pc#
- #Vcp driver download download#
In the above example, “Silicon Labs CP210x USB to UART Bridge (COM3)” is listed. Click in the displayed window.Ĭlick “Ports (COM & LPT)” to extend it, then you can find “Silicon Labs CP210x USB to UART Bridge (COMxx)”.The “COMxx” number is different depending on your PC.
#Vcp driver download Pc#
(Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a USB cable, or after connecting the KPG-22U/46U/186U to the PC.)ġ. Open the "Device Manager" to confirm which COM port number is assigned for connection with the device. If a reboot request appears, please reboot the PC.
#Vcp driver download software#
The installation of the device driver software will start automatically. Turn the transceiver power ON, then connect it to a PC via a connection cable for the transceiver.
#Vcp driver download install#
In the created folder, double click the "Cp210xVCPInstaller_x86.exe" with 32-bit OS, or the "Cp210xVCPInstaller_圆4.exe" with 64-bit OS, and follow the instructions that appear on the display to install the virtual COM port driver.
#Vcp driver download download#
This virtual COM port driver installation program is provided by Silicon Laboratories Inc.Īfter reading through the following explanations, feel free to download and install the software.ĪTTENTION: Do not connect the device to a PC before installing the virtual COM port driver.Įxtract the downloaded file ("CP210x_Windows_Drivers.zip" for Windows ® 8.1, or "CP210x_Universal_Windows_Driver.zip" for Windows ® 10) into a designated folder.In the designated folder, a folder labeled "CP210x_Windows_Drivers" or "CP210x_Universal_Windows_Driver" will be created.
You can connect your TS-990S, TS-890S, TS-590SG, TS-590S, or TH-D72A/E to a PC via a USB cable, or you can connect your TH-K20A/E, TH-K40A/E, TM-281A/E, TM-481A, or other transceivers to a PC via the KPG-22U/46U/186U programming cables by installing the virtual COM port driver in the PC, and then utilize the Radio Control Program, Memory Control Program, or other software we have provided.
Thank you for choosing the KENWOOD transceivers. Now make sure the previous cp210x.ko kernel module wasn’t loaded: $ lsmod | grep cp210x Now copy the newly built kernel module, cp210x.ko in it’s place: sudo cp cp210x.ko /lib/modules/`uname -r`/kernel/drivers/usb/serial/cp210x.ko Now move any pre-existing cp210x.ko kernel out of the way: sudo mv /lib/modules/`uname -r`/kernel/drivers/usb/serial/cp210x.ko /lib/modules/`uname -r`/kernel/drivers/usb/serial/cp210x.ko.orig Make: Leaving directory `/usr/src/linux-headers-3.5.0-19-generic' Deploy LD /home/manny/cp210x/Linux_3.x.x_VCP_Driver_Source/cp210x.ko Make: Entering directory `/usr/src/linux-headers-3.5.0-19-generic'ĬC /home/manny/cp210x/Linux_3.x.x_VCP_Driver_Source/cp210x.oĬC /home/manny/cp210x/Linux_3.x.x_VCP_Driver_Source/ Make -C /lib/modules/3.5.0-19-generic/build M=/home/manny/cp210x/Linux_3.x.x_VCP_Driver_Source modules NOTE: You can browse the different versions of the kernel here: Compile Replace the linux-3.5.y with your version: $ wget -O cp210x.c Now download the appropriate version of cp210x.c for your kernel. Now make yourself a little work area for all this: mkdir -p $HOME/cp210x & cd $HOME/cp210x Install the kernel headers & build tools for your kernel version: sudo apt-get install linux-headers-$(uname -r) build-essentials Incidentally I’m on Ubuntu 12.10: $ lsb_release -r Source link is: Building cp210x for your kernel versionįirst make note of your major & minor numbers for your kernel you have (i.e. This USB driver is not in the kernel by default and have to be installed specifically for your kernel version: This entry was posted in Howto - Ubuntu on Augby Matz Persson
0 kommentar(er)
